Filter vakum Argo-Hytos E178, E258

Filter Return-Suction Argo-Hytos E178 and E258

filtration fineness: 10, 16 microns

maximum flow rate: 250 l/min

maximum pressure: 10 bar

Application: For use in mechanisms with hydraulic drives, in cases where the drain flow under any operating conditions is higher than the flow of the feed pump oil.

Operating characteristics: Wear protection: Thanks to the filtering elements, which, during full-flow filtration, meet the highest cleanliness class standards.

Suction filter functions: Thanks to 100% filtration of the incoming flow, dirt does not penetrate into the feed pump. Drain filter functions: Thanks to full-flow filtration in the return system, pumps are protected from the ingress of dirt particles remaining in the system after installation or repair, or caused by wear or penetration from the outside.

Filtering elements: Flow direction from outside to inside. The star-shaped pleating of the filter material provides: Large cleaning surface; low pressure drop; High dirt retention capacity; Long service life.
Materials:

Filter head: aluminum alloy

Filter cup: Polyamide, glass fiber reinforced

Seals: NBR (viton on request)

Filter material: EXAPOR®MAX 2 - mesh of inorganic multilayer glass fiber
Paper - cellulose fabric impregnated with resin
Accessories:
Electric and / or visual clogging indicators - as chosen with one or two switching points, independent of temperature.

Installation: Standard without restrictions, vertical.

Selection table