Filter saringan pembuangan Ikron seri HF554

Filter drain Ikron series HF554 Filter HF 554, installed on the tank, is specifically designed for direct connection to the return line of the hydraulic circuit to protect it from contaminants. Working pressure: 116 psi (8 bar) Oil outlet extension from pipe connection Fluid-slowing diffuser. Liquid level sensor. MATERIALS Cover: aluminum. Reinforced nylon Casing: anodized aluminum (series 10 and 20), aluminum (series 30 and 40) Bowl: reinforced nylon Seals: Buna - Viton End cover: galvanized steel Inner tube: galvanized steel, stainless steel Filtering substances: cellulose, reinforced cellulose, microfiber glass - Filters of sizes 10.060, 10.129, 20.077, 20.122, 20.201, 20.280, and 30.195 are supplied with a reinforced nylon bowl. Lacquered steel bowl is available upon request. - Filters of sizes 30.239, 40.122, 40.194, 40.195, 40.239, 40.390, and 40.512 are only supplied with a lacquered steel bowl. FLUID COMPATIBILITY In accordance with ISO 2943 (ISO 6743/4 standard) Mineral oils: (2) HH - HL - HM - HR - HV - HG Water emulsion (2) HFAE - HFAS Glycol water (2) (4) GFS Synthetic fluid (3) HS - HFDR - HFDU - HFDS LEAKAGE Max. 166 g/min (630 l/min) PRESSURE Working pressure: 116 psi (8 bar) Test pressure: 174 psi (12 bar) Burst pressure: 232 psi (16 bar) Impact pressure: (according to ISO 2941) 145 pounds per square inch (10 bar) BYPASS VALVE Bypass setting: 25 pounds per square inch (1.7 bar) The overall pressure drop of the filter is calculated by summing the pressure drop value in the filter casing and the filter element. In normal operating conditions, the overall value P in HF 554 filters should not exceed 5.8 pounds per square inch (0.4 bar). Please check availability with the manager!