Filter drain Argo-Hytos series RFT454 and RFT464

Filter drain Argo-Hytos series RFT454 and RFT464

filtration fineness: 10, 16, 30 microns

maximum flow rate: 650 l/min

maximum pressure: 10 bar

Application: In high pressure return lines of hydraulic systems.

Wear protection: Using filtering elements that even with full filtration meet the highest cleanliness class requirements.

Failure protection: By full-flow filtration in the system, pumps in particular are protected from dirt particles entering the system from the outside, remaining after assembly, repair, due to wear.

Special features:

Relief valve: Located near the inlet of the filtering element to prevent contaminated particles from entering the clean side of the filter.

Removable bowl: In case of technical maintenance, the filter bowl is removed together with the filtering element.

Filtering elements: Flow direction from outside to inside. Star-shaped pleating of the filter material provides: Large cleaning surface; low pressure drop; high dirt holding capacity; long service life.
Materials:

Filter head cover: aluminum alloy
Filter head: aluminum alloy
Housing: phosphatized steel

Seals: NBR (viton on request)

Filter material: EXAPOR®MAX 2 - mesh of inorganic multi-layer glass fiber
Paper - cellulose fabric impregnated with resin
Accessories:
Electric and / or visual clogging indicators - as chosen with one or two switching points, temperature-independent.

Extension tubes or diffusers at the bowl outlet are available in several variants upon request. Combination of both variants is possible.
Extension tube: Proper length of the extension tube ensures outlet below
minimum oil level and prevents foaming.
Diffuser: Diffusers reduce oil velocity and direct oil outlet at 90 °. This function also prevents oil foaming and swirling of solid particles at the bottom of the tank.

Selection table