Filter drain Argo-Hytos seri RFT222

Filter drain Argo-Hytos series RFT222

Filtration fineness: 10, 16, 30 microns

Maximum flow rate: 270 l/min

Maximum pressure: 10 bar

Application: In high pressure return lines of hydraulic systems.

Wear protection: Using filtering elements that even with complete filtration meet the highest cleanliness class requirements.

Fault protection: By means of full-flow filtration in the system, pumps are primarily protected from dirt particles entering the system from the outside, remaining after assembly, repair, due to wear.

Special features:

Bypass valve: Located near the inlet of the filter element to prevent contaminated particles from entering the clean side of the filter.

Removable bowl: In case of technical maintenance, the filter bowl is removed together with the filter element.

Bypass filter: integrated into the filter element and prevents the entry of coarse particles during filling or re-fixing during technical maintenance or repair. Filling can be done on the filter. Therefore, the lid must be removed. In the operating process
bypass filter prevents dirt from entering the tank when the bypass valve is open.

Filter elements: Flow direction from outside to inside. Star-shaped pleating of the filter material ensures: Large cleaning surface; low pressure drop; High dirt retention capacity; Long service life.
Materials:

Screw-on lid: polyester, glass fiber reinforced

Filter head: aluminum alloy

Filter cup: Polyamide, glass fiber reinforced

Seals: NBR (viton on request)

Filter material: EXAPOR & reg; MAX 2 - mesh of inorganic multilayer glass fiber
Paper - cellulose fabric impregnated with resin
Accessories:
Electric and / or visual clogging indicators - as chosen with one or two switching points, independent of temperature.

Extension tubes at the outlet of the bowl are available in several lengths upon request.

Selection table