Filter drain Argo-Hytos seri RFL090 dan RFL100

Filter drain Argo-Hytos series RFL090 and RFL100

filtration fineness: 10, 16, 30 μm

maximum flow rate: 120 l/min

maximum pressure: 10 bar

Application: In high-pressure return lines of hydraulic systems.

Filtering elements: Flow direction from outside to inside. Star-shaped pleating of the filter material provides: Large cleaning surface; low pressure drop; High dirt holding capacity; Long service life.
Materials:

Screw-on cover: polyester, glass fiber reinforced

Filter head: aluminum alloy

Filter bowl: Polyamide, glass fiber reinforced

Seals: NBR (viton upon request)

Filtering material: EXAPOR®MAX 2 - mesh made of inorganic multi-layer glass fiber
Paper - cellulose fabric impregnated with resin
Accessories:
Electric and / or visual clogging indicators - optional with one or two switching points, temperature-independent available on request

Specifications:

Nominal flow rate: Up to 120 l/min / 32 gal/min (see selection table). Element service life 500 hours of operation with average liquid contamination of 0.07 g/l/min. Flow velocity in connecting lines ≤ 6 m/s
Connection: Threaded ports according to ISO 228 or DIN 13 and SAE standard J514. Sizes are specified in the selection table (other ports available on request).
Filter grade: 10 μm (c) ... 30 μm (c). ß-values according to ISO 16889
Hydraulic fluids: Mineral oil and biodegradable liquids
Temperature range: Ambient -30 ° C ... +100 ° C (temporary -40 ° C ... +120 ° C)
Liquids -22 ° F ... +212 ° F (temporary -40 ° F ... +248 ° F)
Operating pressure: Max. 10 bar / max. 145 psi
Mounting position: Vertical mounting is preferable, filter head on top.

Selection table