Filter saringan Argo-Hytos seri E094, E103, dan E143

Filter drain Argo-Hytos series E094, E103 and E143

filtration fineness: 5, 10, 16, 30 microns

maximum flow rate: 135 l/min

maximum pressure: 10 bar

Application: In high pressure return lines of hydraulic systems.

Protection against wear: Using filtering elements that even with full filtration meet the highest cleanliness class requirements.

Protection against failures: Through full-flow filtration in the system, pumps are primarily protected from dirt particles entering the system from outside, remaining after assembly, repair, due to wear.

Special features:

Relief valve: Located near the inlet of the filter element to prevent contaminated particles from entering the clean side of the filter.

Removable bowl: In case of technical maintenance, the filter bowl is removed together

with the filter element.

Soap - waterproof, removable, with a fineness of 2 microns. Ventilation of the reservoir with an integral star-shaped corrugated filter:

Filter maintenance: 

Filtering elements: Flow direction from outside to inside. The star-shaped pleating of the filter material provides: Large cleaning surface; low pressure drop; high dirt retention capacity; long service life.
Materials:

Screw-on cover: polyester, reinforced fiberglass

Filter head: aluminum alloy

Filter bowl: Polyamide, reinforced fiberglass

Seals: NBR (viton on request)

Filtering material: EXAPOR®MAX 2 - mesh of inorganic multi-layer fiberglass
Paper - cellulose fabric impregnated with resin
Accessories:
Electric and/or visual clogging indicators - optional with one or two switching points, temperature independent.

Additional oil separator (No. E 103.1702) available on request. Extension pipes at the outlet of the bowl are available in several lengths upon request.

Selection table