Filter penyaring Argo-Hytos seri E043 dan E072

Filter drain Argo-Hytos series E043 and E072

filtration fineness: 5, 10, 16, 30 microns

maximum flow rate: 70 l/min

maximum pressure: 10 bar

Application: In high pressure return lines of hydraulic systems.

Wear protection: Using filtering elements that even with full filtration meet the highest cleanliness class requirements.

Failure protection: Through full-flow filtration in the system, pumps are primarily protected from dirt particles entering the system from the outside, remaining after assembly, repair, due to wear.

Special features:

By-pass valve: Located near the inlet of the filter element prevents contaminated particles from entering the clean side of the filter.

Removable bowl: In case of technical maintenance, the filter bowl is removed together with the filter element.

Extension pipe: The correct length of the extension pipe ensures oil outlet below the minimum level and prevents foaming.

Filter elements:
Flow direction from outside to inside. Star-shaped pleating of the filter material provides: Large cleaning surface; Low pressure drop; High dirt holding capacity; Long service life.
Filter maintenance: 
Ventilation filter - waterproof, removable, with a fineness of 2 microns. Ventilation of the tank with an integral holographic star-shaped filter:

Filter elements: Flow direction from outside to inside. Star-shaped pleating of the filter material provides: Large cleaning surface; Low pressure drop; High dirt holding capacity; Long service life.
Materials: Screw-on cover: polyester, reinforced fiberglass

Filter head: aluminum alloy

Filter: Polyamide, reinforced fiberglass

Seals: NBR (viton on request)

Filtering material: EXAPOR®MAX 2 - mesh of inorganic multi-layer fiberglass
Paper - cellulose fabric impregnated with resin
Accessories:
Electrical and/or visual clogging indicators - optional with one or two switching points, temperature-independent.

Selection table